![](../pictures/sxt10.jpg) SXT10/SXT20
Small
mobile 40' or 70' tower
The
SXT 10 system is a very flexible real free fall tower, which requires
very little space and its set up within a few hours. It consists
of a 16 x 16 ft (5 x 5 m) SCAD net structure and a small tower equipped
with a staircase.
It can also be set up without a tower to release
riders into free fall from any other 40 - 70 ft structure or building.
It is the perfect solution to enhance business of old ride towers.
Technical
Data SXT10
Capacity/h: |
60 |
Height: |
40
ft / 12 m |
Operational
staff: |
2 |
Footprint: |
16x21ft
/5x7m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/prod_sxt_small.jpg) SXT40
Scad system for existing towers
This
set up is based on an existing towers, from which riders can be launched
into free fall. The SCAD landing device is suspended from four small
tower structures (16,5 m / 55 ft), leaving free airspace between
the net and the release point.
System includes winch system and small
towers.
Technical
Data SXT40
Capacity/h: |
80 |
Height: |
any
tower height |
Operational
staff: |
2 |
Footprint: |
43x43ft/13x13m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/prod_kl_sd40.gif) SD40
SCAD
System Mobile Unit
This
system is completely dismantable and fits into a minivan. It is
especially designed for mobile operations and is installed on mobile
cranes.
It can also be attached to any existing tower, building
or other structures.
Technical
Data SD40
Capacity/h: |
35 |
Height: |
141ft/43m |
Set
up/down: |
1h |
Operational
staff: |
3 |
Footprint: |
50x50ft/16x16m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/SMTtotale.jpg) SMT40
SCAD
Mobile Tower
This
mobile tower is equipped with a centrally lifted cabin. Up to 4 riders
enter the cabin on the ground to be lifted into release position. It is transported on a 40ft truck w/ small trailer and requires a
mobile crane and forklift for set up. It is designed for use at fairs
and seasonal seaside operations, that donīt allow fixed installations.
Technical
Data SMT40
Capacity/h: |
60-80 |
Height: |
141ft/43m |
Set
up/down: |
16h |
Operational
staff: |
3 |
Footprint: |
60x60ft/20x20m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/prod_kl_sdt40.gif) SDT40
SCAD
Tower
This
is the light version of the SCAD tower, which operates a central
rider cabin in combination with the SCAD landing device.
Technical
Data SDT40
Capacity/h: |
40 |
Height: |
165ft/55m |
Operational
staff: |
2 |
Footprint: |
50x50ft/16x16m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/prod_kl_SPT40.gif) SPT40
Sky
Park Tower
This
tower is designed as multi-use structure, that has the stability
to accomodate not only the SCAD Dive, but other rides like slides,
rotors and swings, as well as a panoramic platform.
It operates the
SCAD independently inside and is accessed by an external lift cabin.
Technical
Data SPT40
Capacity/h: |
80 |
Capacity
panoramic platform: |
25 |
Operational
staff: |
2 |
Footprint: |
50x50ft
/16x16m |
|
![](../buttons/more_info.png) |
|
|
![](../pictures/prod_kl_sms.gif) SMS
SCAD
MEGA SPLASH
By installing
a shallow pool underneath the net, any SCAD system can be converted
into a wet ride.
After the net has soaked up water in the pool and
has been lifted back into position, 30 ft off the ground, it produces
a mega size splash upon landing, which is thrilling and refreshing
at the same time.
Technical
Data SMS
Capacity/h: |
n.a. |
Height: |
n.a. |
Set
up/down: |
0,5h |
Operational
staff: |
n.a. |
Footprint: |
36x36ft/12x12m |
|
![](../buttons/more_info.png) |
|
|
Attendents and harnessing
The
SCAD Dive requires only 2 staff for its operation.
The ground controller instructs the riders how to put on the easy
to handle one-size harnesses. |
The
special CFF (controlled free fall) harness is designed
as a 2 in 1 system, wich has an additional integrated
safety harness and guarantees the correct body position under
any circumstances. |
The
2nd operator works at the top of the tower and connects
the rider to the release mechanism.
Upon a count down he pulls the release and the rider starts a 100
ft free fall. |
Back
on the ground the rider simply walks out of the landing
net.
In standing position the harness can be removed quickly by opening
two buckles. |
|
|
Alternative towers
MONTIC
also offers alternative tower models for any purpose.
Pipe structures are cost efficient and have great load capacities
for extensive attachments, such as bungee ramps, swing platforms
etc.
Our internal CAD supported design department is ready to convert your
wishes into reality. Our product range includes all from custom
made winch systems to elevators and safety systems. |
|
The
ride
The
feeling of a SCAD dive is extraordinary and unusual.
It is the only thrill ride, that combines thrill with a maximum
of comfort.
There are no distracting elements or uncomfortable impacts. |
|
Safety
![](../pictures/rides_ssov_pic8.jpg) MONTIC
SCAD systems are built according to German safety standards and
have been tested and approved by the TÜV Germany. They
also comply with US ASTM standards.
It has also been inspected by the HSE-UK, DTI-Denmark, TÜV-Austria,
SA-Sweden, Lift Institute - Netherlands etc. and operates in 18 countries
around the world including the USA and Japan. |
|
![](../pictures/top.gif) |